HOME
THE PHOTOGRAPHY
FINDING YOUR PICTURE
Standard Prints
The Panorama Format
New! Framed Panorama Prints
New! Panorama Posters
Inscriptions for Standard Prints and Panorama Prints
ScreenSavers
INVOICING AND SHIPMENT
CONTACT PHANTOM BIKER
Rare Photos of Phantom Biker
New! Framed Panorama Prints!

Panorama prints are new from PhantomBiker and capture more of your ride! (click on the link "The Panorama Format" for more information).

Each of the four panorama sized prints are a unique size. Once the image is adjusted for color, your print is cropped to create the best photo composition while capturing as much of the original image as possible.


Steps to Create Your Framed Panorama Print
1. Select the print size:
a. FR-10 Image Size: 6.75" high x 11" wide
b. FR-11 Image Size: 7.5" high x 12" wide
c. FR-16 Image Size: 10.5" high x 17" wide
d. FR-20 Image Size: 13" high x 21" wide

2. A "PhantomBorder" is added around the image
A rich black border is added to each image. The border is 1" all the way around on the two smaller sizes and is 1" on the top, 1" on the bottom and 1.5" on each side on the two larger sizes. If you have your print inscribed (see "Inscriptions for Standard Prints and Panorama Prints") the inscription will be added on the lower right within the PhantomBorder.

3. When framing the print, a Black Mat is added
A black mat is added to each framed print as follows:
a. FR-10 1.0" top, bottom and sides
b. FR-11: 1.5" top and bottom and 2" on each side
c. FR-16: 1.5" top and bottom and 2" on each side
d. FR-20: 2" top and bottom and 2.5" on each side

4. Mounting and Framing
Your print and mat are mounted on self-adhesive foamcore and assembled into a black frame (note: the silver highlight within the frame was just discontinued and is no longer available. The current frame example is shown below). The frame width is approximately 1.625"). Clear, non-glare acrylic protects your framed picture. Finally a paper backing is added to the back of the frame. Mounting hardware is included but not attached to the frame (you can choose which type of hardware to use.)


5. Final Size
After adding the PhantomBorder to the image and assembling the mat and frame, the approximate size of your framed print is as follows:

a. FR-10: 17.75"W x 10.5"H (Approximate)
b. FR-11: 20,75"W x 15.25"H (Approximate)
c. FR-16: 26.75"W x 18.25"H (Approximate)
d. FR-20: 31.75"W x 21.75"H (Approximate)